At the National Safety Council's annual Safety Congress & Expo in September, OSHA shared preliminary numbers for its most frequently cited standards.
Some context: This list has remained largely unchanged for a decade. Every year, thousands of preventable incidents cause needless injuries, illnesses, and in some cases, deaths. OSHA penalties can exceed $16,550 per violation, and as much per day for every day the issue isn't fixed by OSHA's deadline. The fine for a willful or repeated violation can be 10 times as much.
So, here's an early look at the top five.
1. Fall Protection, General Requirements
In OSHA's words, "Falls are among the most common causes of serious work-related injuries and deaths." Falls take two spots on the list. Combined with Fall Protection Training Requirements (#8), they account for more than 5,000 citations.
Fall violations are common because falls have so many causes: wet or uneven surfaces, poor lighting, ladders set up incorrectly or structurally defective, crowded workspaces, and bad weather.
In “general industry,” which includes the automotive repair space, if an employee can fall to a lower level that is 4 feet or more, the employee must be protected from the fall with guardrails or a fall-arrest system.
As with so many OSHA violations, one leading cause is inadequate training.
And don’t think that you’re out of the woods on fall protection simply because automotive repair is not high-rise construction.
Here’s why: Climbing on top of vehicles, when the employee is over 4 feet off the ground, requires fall protection. For example, when a service technician is replacing an air conditioning unit on the roof of a logistics van.
In a situation like this that I’ve seen firsthand, the employee came across a rusted bolt. While attempting to remove it, the tech applied excessive force, breaking the bolt and causing the employee to fall backward off the side of the van. Ultimately, this situation resulted in a serious head injury.
Quick check:
Have you found and eliminated all fall risks?
Do you have fall arrest systems ready?
Are you training workers on fall protection?
2. Hazard Communication
The Hazard Communication Standard is how you're supposed to inform employees about dangerous chemicals in the workplace. It covers labeling, tracking, and training.
Anywhere workers could be exposed to a chemical-related injury, you need a safety data sheet (SDS) for each chemical used in the operation, a written hazard communication plan, and training for every exposed worker.
SDSs are considered medical records and need to be maintained at the establishment for 30 years.
Violations usually come down to improper container labeling. Dealers may fail to label containers properly, omit substances from their chemical inventory, or fail to obtain SDS from manufacturers. Many get cited for not maintaining a written plan at all.
In one example I've seen, a dealership service technician was performing an inspection on a trade-in vehicle he had brought into the shop. While the hood was open and his back was turned, the engine caught fire due to a bad wiring connection. When the tech noticed this, he panicked, turned back to his workbench, and saw a bottle of tea sitting there. He opened the bottle and went to dump it on the fire to extinguish it.
The problem was: The technician used that same bottle the day before to collect a fuel sample. Needless to say, the fire erupted and caught the employees' clothes on fire as well.
This incident shows why we need to continue supporting consistent efforts to comply with the hazard communication standard.
Quick check:
Is a written copy of your updated Hazard Communication Program available to all employees?
Does everyone have access to an SDS for every chemical on site?
Are all secondary chemical containers labeled?
The car business moves fast. Stay ahead.
The most important insights from automotive retail, delivered to your inbox daily.
Join 74,000 others now, it's free:
3. Lockout/Tagout
Some machines can seriously injure or kill workers because they release hazardous energy, whether that's electricity, hydraulic pressure, or steam.
A hydraulic press that hasn't been de-energized could crush someone.
Lockout/tagout (LOTO) lays out how to safely de-energize equipment before servicing it.
The thing is: These violations frequently come down to poor documentation. Employers should have written procedures for every machine in use. Inadequate training is the other major risk, and it isn't just for the people applying the locks. Anyone who works around dangerous equipment needs some level of LOTO training.
As a recent example, OSHA issued a proposed citation of $446,000 for the lack of a lockout/tagout program in New Jersey.
Car washes have multiple energy sources that must be controlled and locked out during repairs or maintenance. Parking a vehicle in the car wash to prevent others from using it is not enough; the hydraulic, pneumatic, and electrical energy must all be controlled before any work is completed.
Search for “car wash employee injuries," and you’ll see that employees are all too often caught up in these dangerous moving parts…
Quick check:
Have you identified every hazardous machine in your facility?
Have you written LOTO procedures for every machine?
Do employees have the correct locks and tags?
Have you designated authorized/affected employees and trained them in the procedures?
4. Scaffolding
OSHA's scaffolding standard covers supported scaffolds, suspended scaffolds, and aerial lifts, along with fall protection, guardrail height, inspections, and training.
Most violations result from faulty equipment, dangerous environmental conditions, improper training, or a combination. OSHA also requires a "competent person" on hand to determine whether scaffolds are safe, direct their setup and teardown, and conduct inspections.
For example, at one dealership I’ve seen, scaffolding was set up during a building remodel, but the employee area restrictions were not designated. One dealership employee pushed open a door, which bumped into a scaffold, knocking loose a tool that fell from the platform. This simple accident caused the employee to have their head hit by this tool, causing a laceration. Ensure that during any construction at your facility, a representative from the dealership meets with the contractor to review safety needs and restricted areas.
Quick check:
Are the right fall protection and fall arrest systems in place?
Are platforms fully planked or decked?
Have all employees been trained on proper scaffolding use?
5. Ladders
Most ladder injuries and deaths are falls. Many violations come down to simple misuse and mismeasurement.
A common one is side rail height: When a portable ladder is used to reach an upper level, the side rails must extend at least three feet above the landing surface. Another is standing on the top of a stepladder. No worker should ever sit, stand, or climb on it.
In one example I’ve seen, a maintenance employee was using a ladder to clear out bird nests from the dealership's front-facade lighting. The ladder's feet were set too far away from the building's front wall, and during the climb, the ladder slipped out at the bottom, causing the employee to fall and receive a concussion and a broken arm.
Remember, ladders need to be spaced 1 foot away from the supporting wall for every 3 feet the ladder extends vertically.
Quick check:
Are you inspecting every ladder before use?
Are ladders completely secured before use?
Are all workers trained on safe ladder use?
Are ladders secured in a designated area after their use?
Interested in the full top 10?
KPA's OSHA Top 10 guide covers the other five standards on the preliminary list:
Respiratory protection, powered industrial trucks, fall protection training, eye and face protection, and machine guarding.
Each one includes warning signs and a full prevention checklist you can walk your shop with. We'll update it when OSHA releases the final rankings.
A quick word from our partner
What does compliance look like from the front desk to the back bay?
A tech under a lift, an advisor at the counter, and a customer at the F&I desk all count on the same thing: rules that are followed, not just filed. KPA has been in dealerships since 1986 with software, training, and 150 consultants covering safety, HR, privacy, and FTC compliance.











